PepDose
Syringe mathsReviewed Nov 12, 2026

How to read an insulin syringe

On a U-100 insulin syringe, 100 units fill 1 mL, so one unit is 0.01 mL. Ten units is 0.1 mL, 50 units is 0.5 mL. Units measure volume, not the amount of a drug: how many mg are in those units depends on how strong the liquid is.

Education only, not medical advice. This page explains how the scale works; it does not say what anyone should use. PepDose sells no peptides.

What the numbers on the barrel mean

The numbers are units of volume on a fixed scale. A U-100 syringe is built so that the full 1 mL barrel is marked 0 to 100. Half of the barrel (0.5 mL) is 50 units and a tenth (0.1 mL) is 10 units.

mL = units ÷ 100
units = mL × 100

The same scale is used by U-100 insulin itself, which contains 100 units in each mL (FDA-approved label, see sources). That is why the unit marks on the syringe and the strength of U-100 insulin line up. For anything else you draw up, the units are still just hundredths of a mL. To turn them into mg you need the strength of the liquid; the units to mg converter does that step.

0.3 mL, 0.5 mL and 1 mL syringes

Insulin syringes come in three common barrel sizes. The unit marks mean the same on all three. The smaller barrels just spread the same scale over a longer stretch, which makes small amounts easier to read.

U-100 insulin syringe barrel sizes and the most units each can hold
Syringe sizeHolds up toVolume of 1 unit
0.3 mL30 units0.01 mL
0.5 mL50 units0.01 mL
1 mL100 units0.01 mL

The spacing of the marks (every 1 unit, every 2 units, half units) differs by brand. Count the marks on your own syringe.

Units to mL chart

Syringe units converted to millilitres on a U-100 syringe
Syringe unitsVolumeSmallest syringe that holds it
1 units0.01 mL0.3 mL
2 units0.02 mL0.3 mL
5 units0.05 mL0.3 mL
10 units0.1 mL0.3 mL
15 units0.15 mL0.3 mL
20 units0.2 mL0.3 mL
25 units0.25 mL0.3 mL
30 units0.3 mL0.3 mL
40 units0.4 mL0.5 mL
50 units0.5 mL0.5 mL
60 units0.6 mL1 mL
75 units0.75 mL1 mL
100 units1 mL1 mL

Reading the line

  • Hold the syringe level with the needle up and the scale facing you.
  • Line up the edge of the plunger stopper nearest the needle with the mark you want. Check your syringe's own instructions, since designs differ.
  • Check whether the marks go up in 1s, 2s or halves before you count.
  • Look for air bubbles, which take up room and read as liquid.
  • Confirm the syringe says U-100 before using any units chart.

Why U-100 matters

Syringes with a different scale (for example U-40) read volume differently, so the same mark can mean a different amount. The FDA-approved label for U-100 human insulin tells patients to use a syringe marked for U-100 and warns that the wrong syringe can lead to a mistake in dosage. Every chart on this site assumes a U-100 syringe.

Turn units into mg for your vial

Enter your vial size, the water you added and the amount, and the calculator gives the units to draw. It runs in your browser and is free without an account.

Your vial

mg
mL

Syringe size

Result

Draw per injection

5units

= 0.05 mL on a U-100 insulin syringe

05101520253035404550
Draw to the 5 mark on a 50-unit (0.5 mL) syringe
Concentration
5 mg/mL
Each unit holds
50 mcg
Doses per vial
40
Dose
250 mcg

Common questions

How do you read an insulin syringe?

Find the number of units you want on the barrel, then pull the plunger back until the edge of the plunger stopper nearest the needle lines up with that mark. On a U-100 syringe each unit is 0.01 mL, so 10 units is 0.1 mL. Marks are spaced differently on different syringes, so count the marks on yours rather than assuming.

What does U-100 mean on a syringe?

It means the syringe is marked for U-100 insulin, which contains 100 units per mL. On that scale 100 units equal 1 mL and 1 unit equals 0.01 mL. The FDA-approved label for U-100 human insulin says to use a syringe marked for U-100.

How many mL is 10 units on an insulin syringe?

0.1 mL. A U-100 syringe has 100 units per mL, so mL = units ÷ 100. 20 units is 0.2 mL, 50 units is 0.5 mL.

What is the difference between a 0.3 mL, 0.5 mL and 1 mL syringe?

Only the size of the barrel. A 0.3 mL U-100 syringe holds up to 30 units, a 0.5 mL one holds up to 50 units and a 1 mL one holds up to 100 units. The unit marks mean the same thing on all three; a smaller barrel is just easier to read for small amounts.

Can I use a U-40 syringe for U-100 insulin?

No. The two scales are different, so reading the wrong one gives the wrong volume. The FDA-approved U-100 insulin label says that using the wrong syringe can lead to a mistake in dosage. Check the syringe is marked U-100 before relying on any chart on this page.

Is this medical advice?

No. This page explains how the scale works. It does not say what dose or volume anyone should use. Follow your own prescription and ask a licensed clinician or pharmacist.

Sources

  • FDA-approved label for U-100 human regular insulin (2015): patient information "Correct Syringe Type" (U-100 insulin contains 100 units/mL; use a syringe marked for U-100; the wrong syringe can lead to a mistake in dosage).
  • The unit-to-mL chart is arithmetic on that scale (mL = units ÷ 100); no source is needed for the sums.

Last reviewed Nov 12, 2026. Education only, not medical advice. PepDose sells no peptides. The formulas and tests are on the methodology page.